Product Name:rfid smart car alarm passive keyless entry door lock with automotive qualified connector and Morse Decoder Unlock and Start Engine

product model:PKE-100ZL

brand is cardot

Product main unit features:

Professional 3D antenna
Automotive qualified connectors,cables and chips
Super low-power design
RFID anti-collision tech
FHSS high security design
Anti-hajacking supported
Over loading protection
High power current drivable
Dual MCU controller

B: Basic Features:

Passive Keyless Lock/Unlock Functions
Remote Lock/Unlock
Anti-hijacking
Search Car
Release Smart Key (Exhibition Mode)
Low Battery Warning
Saving Power Mode
Smart Keys Switching
Auto Window-Up (Changes according to car’s specifications; realized by relays)
Window Closer (optional) is recommended to replace relays for less installation labor.
Push Start/Stop Engine
Remote Start/Stop Engine
Morse Decoder Unlock and Start Engine
FHSS/ power saving technology adopted

C: Safety Caution:

the driver must follow below instructions to avoid damagers and injuries

1. to avoid pinch injury or other accident,do not put hand,head or other things on the window when leacing the car.

2. to avoid pinch injury or other accident by children triggering the window closer,do not leave them alone inside the car.

3. change the battery in time when receive low power warning.if smart key is put inside the car or no changing battey for long time,the car should possibly be locked.

D: Morse decorder(Password setup steps):

When emergency happens,for example the smart key completely gets damaged,missed,out of battery or other situation that smart key can not be used,we supply the resolution under security policy:Morse decorder

by knocking outside window t input a group passwords,make the car to be normally unlocked,started and driven,the morse decorder is available only after setting up a password.please set up passwords as follows:

turn to "ON",press "Unlock" of smart key,LED on morse decorder flashes,now it enters the setup status.complete the procedure in 4 minutes;otherwise the setup status will be canceled.knock 10 times on morse decorder(at place of windshield galss).after every know action.wait 1 second,the morse decoder will flash 0.2 second to mean it receivers the knock action.then do next knock action.after all 10 knocks,wait 5 seconds,the morse decoder will flash 1.5 seconds to mean it acts correctly,the password is made up of 6 digits from 1 to 9 times knocks,now we are permitted to start to setup password:example"123456".

knock 1 time to setup first digit"1",LED response 1 time;after 5 seconds LED keeps lighting 1.5 seconds,then go to next step.

knock 2 time to setup second digit"2",LED response 2 time;after 5 seconds LED keeps lighting 1.5 seconds,then go to next step.

knock 3 time to setup third digit"3",LED response 3 time;after 5 seconds LED keeps lighting 1.5 seconds,then go to next step.

knock 4 time to setup fourth digit"4",LED response 4 time;after 5 seconds LED keeps lighting 1.5 seconds,then go to next step.

knock 5 time to setup fifth digit"5",LED response 5 time;after 5 seconds LED keeps lighting 1.5 seconds,then go to next step.

knock 6 times to setup sixth digit"6",LED response 6 time;after 5 seconds LED keeps lighting 10 times.the unlock action is triggered to mean password settup successfully!

Electric Parameters:

Keyless Entry unit parameter:

Working voltage: DC 9V-16V
Main unit static current: < 12mA
Smart key response distance: 2.0M < distance < 2.5M
UHF frequency: 315MHz / 433.92MHz
LF frequency: 125KHz
Remote distance: Open space > 40M
Working temperature: -40 – 105
Working humidity: < 95%

Start Controller parameter:

Working voltage: DC 9V-16V
Static current: < 5mA
Max. control current: 30A
Start output time: 0.6S < time < 4S
Auto cutoff time: 15min
Working temperature: -40 – 105
Working humidity: < 95%

Remote key parameter:

Working voltage: DC 2.1V-3.6V
Static current: < 12μA
Working frequency: 25KHz / 433.92MHz
Battery model: CR2032
Working temperature: -25 – 80
Working humidity: < 95%
Battery life: > 16 months (average)