Cardot car RFID immobilizer anti theft feature car engine start stop system working with alarm remote

remote start stop engine by original car remote keys or aftermarket remotes

Product name: RFID engine start stop system without remotes

Product Model No: 1000PSR-C

brand is cardot

Some installation suggestions:

Must connect oil path wire!

     Oil path wire is also called fuel pump wire or fuel circuit wire,it usually is located downside of car backseat or around the fuel pump.this wire is from car instrument panel to car fuel pump along the car body bottom,it is positive electricity.so you can use multimeter to test target wire!turn the multimetre switch to DC file or stalls,black pen of multimer touches the car metal body,the red pen touches the target wire,turn the key to ON position,that wire with positive power is car oil path wire or fuel pump wire!specificaiton is thick wire just like our 6P start wire specificaton.this is only suggestion to find oil path wire,maybe diferent cars have different oil path wire position or finding methods,so please find a professional staff to find correct oil path wire.

when you start engine,this wire signal is 12V,after engine off,it is 0V.

if you can not find fuel pump wire,and your car is also auto transmission car,you can connect it to constant 12V power.

Must connect lock or unlock wire,they are positive signal,so connect them to original car central lock actuator lock or unlock wire.but if original car central lock signal trigger mode is positive trigger,can connect them to original central lock system lock or unlock control wires!

Must connect car direciton light wire,this is also called turning light or steering light wires,it is positive signal,you only connect one of them.

Must connect car footbrake wire!press the brake and press button to start or stop engine!

Must connect correct 6P start cables:ACC wire,ON1 wire,ON2 wire,Start wire,12V wire,Ground wire.

about our push start module's purple wires,don't need to connect them,they are for future!

after finishing above connection,you can test system working as follows:

press remote car remote unlock button,start button light will be ON,at this time,you press the brake,start stop button backlight will blinks,lastly press button to start engine or stop engine!

Product Basic Functions:

1. RFID immobilizer car engine disarm

this function is anti-theft function,it can be turned on or turned off by DIP switch

2. engine start stop button trigger

shortly press brake to start engine or longly press start button without pressing footbrake

3. Long distance Remote start stop car motor

remote start:in arming,press remote lock button 3 times or press remote lock-unlock-lock-

unlock-lock-unlock in sequence,remiote stop engine:press lock button one time.

4. Product doesn't match with alarm remotes,but it is working with OEM car remote keys or

aftermarket alarm remotes

5. 2 minutes start button auto disabled feature

after engine turned off,car driver could start engine during 2 minutes again,but after 2

minutes,engine button will be disabled.

6. remote start function can be turned on or turned off set by DIP switch

7. outside programmable rfid tag button

8. 0.85second/1second ignition time DIP switch setting

9. it fits diesel or gas car

10. support manual or auto tranmission car

11. 20 minutes car engine auto off feature

after remote start engine,engine will be auto off within 20 minutes if it has not any unlock

action from car owner

product standard composition :

1pc control unit,2pcs RFID cards,1pc ignition button,1pc wiring harness 6P start cable,1pc RFID loop,1pc english manual,1pc colorful packing box.

Product Real Photos: