Why do we need bypass module?
Usually we need to avoid original car chip key immobilizer signal if you need push start function or remote start function?

Model No:BS01

brand:cardot

1. How to disable the OEM Steering wheel lock?

Method 1: Disable the lock pin of the car lock on the steering wheel:

1) Remove the RFID sensing circle on the car key socket of the steering wheel;
2) Insert the car key and turn to the ON position
3) Remove the core of the lock and remove the lock pin or construction of the steering wheel lock,and restore the core of lock to the car key socket.

Disadvantages:

This method will damage the OEM lock of the car,and it is not easy to operate.if you are not a professional staff,we recommend this method!

Method 2:Use a duplicated car key and turn to ON postiion:

1) Copy a car key by your OEM car blank key;
2) Insert the duplicated car key into the key socket and turn to ON position;
3) Break the outside part of the duplicated on the key socket,and keep it on the ON position;leave 1-2cm on the outside of key socket;

Method 2 is more easy to operate,no damage to the original car,we recommend the method 2.

Attention:

Inserting the car key into the key hole is to release the steering wheel lock,bypass module is to release the chip key(RFID key),chip key is used to lock car engine.you can remote start your car when you release the steering wheel lock and chip key lock.

2.How to install the bypass module?

Some cars have RFID car key(chip key),if you want to remote start car or push start engine,you need to have a bypass module,otherwise the car engine can not be started.

Main Steps:

1) Remove the key screws of bypass module control box,open the control box;
2) Insert the OEM car key or key PCB or Key chip under the wire;
3) Lock the locker and press the wires close to the remote key,or key PCB or Key chip;
4) Tighten the screws and lock the case;
5) Circles the sensing the wire on the OEM car key socker(circle more circles can enhance the signal);
6) Fasten the sensing wires to the car key socket with glue;
7) Try to start car engine to confirm the bypass module working,if it is not working,please try circle sensing wire more circles on the car key socket,or check the connection if it is right;
8) Place the bypass module in a hidden place.

Replace way:

you also put the car key chip on the sensing postion of car key socket,and the cover it with glue tape.

Product real photos: