Post Offer Free
Shenzhen Cardot Electronics Technology Co.,Ltd  

Gold Index: 6303

You are here: home  > Remote Vehicle Start Car Engine Start Stop System Prewarm / Precool Function

Remote Vehicle Start Car Engine Start Stop System Prewarm / Precool Function 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: RS1400B

automotive remote starter car engine start stop system prewarm the car in the winter,precool the car in the summer.supproting diesel or p

automotive remote starter car engine start stop system prewarm the car in the winter,precool the car in the summer.supproting diesel or petrol car!

 

Model no is RS1400B

brand is cardot


Product Features
Feature 1 Remote engine start
Feature 2 Perwarm function
Feature 3 3 times start makes sure the most successful rate
Feature 4 auto start checking
Feature 5 15 minutes countdown time engine off function

 


Installation Instructions:

 

A. 6P start wires connections:

 

1. green start wire:

it is starter output(+).connect it to the vehicle's start wire which is positive power when you turn the mechanical key to start position.

 

2. Yellow ON1(ING1) wire:

Ignition output(+),connecting it to main ignition wire that provides +12V when the ignition is ON and while cranking the starter.

 

3. Red Wire:

Main Power Output(+) connecting it to the battery or constant power wire at the ignition switch.

 

4. Blue ON2(ING2) wire:

Ignition output(+),connecting it to main ignition wire that provides instant +12V signal and disappear when you turn the key to ON position.

 

5. White ACC wire:

Accessory output(+)mconnecting it to the accessory wire coming from the ignition switch that supplies power to the heater/air conditioner.some cars may have multiple accessory wires.

 

6. Black wire:

connecting it to ground or negative power

 

B. Blue/White wire footbrake wire connections:

 

connecting this wire to car footbrake switch!it is 12V positive power.

 

C. White/Black wire:Engine start detection wire:

 

it is positive power,connecting it to the high voltage coil from engine distributor,or you also connect it to fuel pump wire!or high voltage induction wire or tach wire!

when engine is started,it has power,when engine is off,it has not power.

use multimeter or test pencil to find target wire!

 

D. Brown wire:Turning direction Light Wire:


Truning light is also called Direction light,Manual turning light switch is near to steering wheel,so you can find turning light wire there,our system has two turning light wires,you can connect the one of them or both of them.this turning light will flash when remote start is successful!

 

so it is judging sign of start status!

 

E. Grey wire:Handbrake Wire:

 

    Must connect this wire to car handbrake swtich if your car is manual tranmission car,on the contray,if your car is auto transmission car,connect it to car metal body!if you don't connect this wire,no remote start function!

 

F. Green wire or blue wire:Side Door Wire

 

when engine is started and it is running,system is still in arm status,so if open the car door illegally,it will trigger side door alarm!

 

Product Composition:

 

              2pcs alarm remotes,1pc main cable,1 main unit,1pc manual,1pc box.

 

Product Real Photos:

 

 

 

 

bigPhoto
 Mr. Mr. Jason

Tel: 86-755-27119211
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Shenzhen Cardot Electronics Technology Co.,Ltd [China (Mainland)]


Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (135)