Passive auto keyless entry motorcycle alarm system with acc alarm trigger and shock sensor alarm trigger

model no:M1600-PKE

brand is cardot

cardot pke motorcycle alarm system with auto arm or disarm feature,don't need to press remote arm or disarm button,it is handfree arm or disarm system.

Product Basic Features:

1. remote arm or disarm
2. pke auto arm or disarm
3. low or high temperature endurance
4. waterproof main unit
5. sensitivity adjustment
6. Mute alarm
7. ACC trigger alarm
8. Alarm Stop
9. Anti-robbery feature
10. Remote start stop engine

Product Standard Composition:

1pc Main unit,1pc pke antenna,2 pcs pke remotes,1pc main cable,1pc alarm siren,1pc english manual,1pc box.

Installation Instructions:

1. pink-gray wire:engine off line

        Basically speaking,how to find motorcycle engine immobilizer wire?

       as for AC engine off motorcycle,please find ignition module trigger wire:start motorcycle,and use this gray wire to touch every target wire of ignition module,if motorcycle engine off,this is correct wire you need to find.cut it two ends and connect the gray wire to the end of ignition mould,pink wire to the other end.

      but as for DC engine off motorcycle,No necessary to connect pink engine off wire,it only has two wire,one is red wire,the other is power door lock output wire,which is orange wire.normall speaking,you need to add one 12V DC relay switch,one end of killer start relay connects to power door lock output wire,the other end of killer start relay connects to gray engine off wire of motorcycle alarm,common pin of relay switch connects to supplying power pin of lock output power wire,and normal closing pin of relay switch connects to supplying power pin of start ignition module,and then cut supplying power wire of original motorcycle ignition module.

2. orange wire: power door lock.

   this wire supplys power to whole vehicle body!

3. blue wire:start wire.

Use key to ignite motor,that wire with instant positive power is start wire.it is power off and then power on.

4. yellow wire(2pcs):direction light wire.

Turn on direction light switch.use test pencil to test target wire,if you get positive power wire,that is direction light wire!

5. red wire:12V

directly connects it to positive pole of storage power.

6. black wire: to ground

Connecting it to vehicle metal body!

     7.last effort to check connection.

    On completion of the fitting of the alarm, reconnect the motorcycle battery and check the alarm functions correctly by testing the operations as described in the “alarm operation” manual. If the alarm does not function correctly, please check all your connections carefully. A multimeter can be of use to ensure that you have correctly identified the motorcycle wires.

Real Photos: