Preface

Thank vou for purchasing this Long-Range Two-Way FM Vehicle System

This vchicle secuity systen features a state-of-the-art technology and MF design

to give you maximum safety and satisfaction in using the system.
1) Please read this manual carefully before using this car alarm do that you'll take
the full advantage of every marvelous featues provided by thes systwm.
2) Seller is responsible for the service and warranrty.
3) The system raquires on specific maintenance. Your remoue control is powered
by a small 1.5volt 3AAA Alkaline battery .When the battery weakens,
operating range will be shortened.When the battery icon"-"begins flashing on
the LCD screen, please replace the battery.
4). This device may not cause harmful interference,
and;This device must accept any interferencereceived,including interference
that may cause undesired operation,Changes or modifications not expressly
to operate this device.
5) Due to the complexity of this system,it must be installed by professional staller
6) All the modules and interconnection cables are inaccessible to the end user except
the remote control,the communication unit and its signal cabes.

Universal Two Way Car Alarm System with remote start stop function

2 way auto car alarm system with remote start stop engine feature LCD remote displays alarm alert information
Model No:CD-T168

Brand:cardot

Product Bacic Features:

1. standard arming mode
2. mute arming mode
3. multi-level security arming
4. disarm
5. query function
6. panic mode
7. trunk release
8. auxiliary output
9. remote engine start

Note:
1). the parking light will flash every 30 seconds during then gnine is running
2). Never start the vehicle if it is not in the either Park or Neutral position and never forget to activate the parking brake before remote start
3). In gasoline vehicles,engine will wait 6 seconds to start after parking light flash,In diesel vehicles,the engine will start when the WAIT TO START indicator on the vehicle 's dash goes out
4). It is unsafe to remote start the vehicle in a garage or other enclosed area.breathing the exhaust from the vehicle is hazardous to your health.

10. disarm the system without remote control
it is emergency reset feature

11. short run tubor mode
12. remote timer start mode
13. valet mode

in valet mode,alarm works only just as a keyless entry:lock or unlock car door,trunk,finding without any security functions.

14. correction of real time clock
15. time set up for personal alarm
16. code memorizing of remote control
17. remote key lock
18. door status warning
19. status memory
20. smart LED indicator

In arming status:LED flashes the same number as the times of pressing button within 5 seconds.
In turbo steta:LED stays solid dor 2 seceonds, then pause for 2 seconds.
In valet mode:LED stays solid.
ACC,Door, Hood/Trunk triggered:LEDstays solid for 0.5 seconds, then pause for 0.5seconds

21. high frequency

Your system remote control and communication unit are produced by FM technology at 433Mhz.
This provides acleaner spectum with less interference and a more stable signal.Enjoy a phenomenal
increase in range, even in areas with high radio interference.

22. code hopping

This system uses code hopping technology to increase the secrity of the alarm.In case the remote
falls out of sync with the main control unit,it will fail to operate.To re-sync the system,
please remove the battery of the remote,wait for 10 seconds and re-power the remote again,and then
press button,the alarm will automatically re-sync and respond to the remotes normally.

23. window rolling up output
24. support diesel or petrol car
25. suport manual or auto transmission car
26. shock sensor alarm
27. side door alarm
28. motion alarm(optional! and extra value!)
29. hood pin alarm(optional! and extra value!)
30. trunk pin alarm(optional! and extra value!)

Product compositions:

1 main unit,2pcs FM LCD alarm remotes,1pc main cable,1pc start module,1pc shock sensor,1pc LED indicator,1pc alarm electronic siren,1pc killer relay,1pc english manual,1pc color box.

Product Real Photos:

Special Instruction:

1. remote battery is cell button battery,model no is 1.5V AAA dry battery,1pc battery per remote,it is easy to buy this battery!so we won't send you remote battery.

2. product has window rolling up output,negative signal trigger,we won't send you window closer module

3. product has ultrasonic sensor slot(motion alarm),but we won't send you ultrasonic sensor!

4. product has trunk and hood alarm trigger wire,but we won't send you hood pin and trunk pin,they are extra value!

System lnstallation:

1. Due to the complexity of this system,installation must only be performed by an authorized dealer.
2. Thoroughly read become familiar with the installation instructions before beginning the installation
3. Review system contents:
a Main ControlUnit
b. Siren
c. Communication unit with built-in Shock Sensor and Valet Switch
d. Starter Kill Relay
e. Remote Starter Module with 5-pin Starter Harness.
f. Harness:
4. Verify vehicle is equipped with electronic fuel injection, and starts/idles normally before installation.
5. Determine if vehicle is equipped with a factory theft deterrent system and obtain proper bypass module
if required.
6. Find a location to mount the hood pin switch that will not interfere with the opening of the hood,and
is not in a position that can accumlate water.The hood pin is a safety device that must be installed to
avoid remote starting during engine servicing.
7. Verify with the owner,the mounting locations for all visible components,including the LED and Receiver.
8. Verfy with the owner,the optional features of vehicle security system and the features that must be
programmed during installation.
9. Inspect and perform a function test of all vehicle systems before and after the installation.
10. Always use aVolt/ohm meter for testing vehicle circuits.Never use a test light.
11. Always look before drilling any holes or mounting self-tapping screws,Be sure fuel lines and exterior
wiring looms are clear as they are often close to the chassis and difficult to see.
12. Protect all wires runnong from the engine comparment to the interior of the vehicle by covering with
electricsl tape and split loom tubing.Be sire to use a grommet when routing wires through the firewall.
13. Properly fuse any additional accessories such as starter module, window module, door lock actuators.
etc.,Making sure to power them separate from the alarm Main Unit.This will ensure the functionality of
the security system in the event of an accessory failure.
14. Remove all fuses to avoid running down the battery during installation.
15. Roll down the driver's side windiw to avoid locking the ignition keys in the vehicle,

Install Guide For Communication Unit

The mounting place of Communication Unit has a substantial influence upon the communication
range of the system.It is recommended to install the Communication Unit to the left-upper side
(left-steering wheel)on the front windedow blind of the driver's seat.Before mounting note to clean the
mounting position with a wet cloth in order to glue the Communication Unit firmly.