auto remote security motorcycle alarm system with microwave sensor alarm trigger long ditance arm or disarm
Model No: MT166R
Brand:cardot

Two Way Motorcycle Alarm
 
Main Functions:
 
1.1 Arm
Park the motorcycle and take the key off ,then press the button lock once to set arm with sound &
flash alarm.In this status,(the LED in the brain unit will blink and the flash lights will gleam once),the siren will sound Beeponce. The remote control will respond with a beep sound to confirm,icons lock and muty on the display lighting on.
 

• Silent arm

Park the motorcycle and take the key off,press the button lock twice to set silent arm mode,The remote control will respond with a beep sound to confirm,then the icons lock and muty on the display lighting on.
 

• Disarm

In arm status,press the button unlock once to unlock and disarm the system,the siren will chirp twice and flash lights will gleam twice also.The remote control will beep twice with blinking of icons to confirm.In silent arm status, the siren doesn’t chirp.
 

• Shock warning

In arm with sound & flash status, if the system is triggered by shock,the siren will beep for 5 times with gleaming of flash lights.The motorcycle could not be started in this situation.To remind the owner ,the remote control will beep for 5 times,then it will be vibrating with blinking of icons (shock and headlight icon).Then the remote will repeat warning once,If it is triggered again within 10seconds,the siren will chirp for 30seconds with gleaming of flash lights,the motorcycle could not be started in this situation ,The remote control will beep for 30 seconds,it will vibrate for 8 times after arming,then it will be vibrating with blinking of icons(shock and headlight icon).The system will arm again.In silent arm status,the siren doesn’t chirp.
 
1.6 ACC ON trigger
In arm status,if anyone tries to start the motorcycle (ACC ON),the siren will chirp for 30 seconds with gleaming of flash lights.The motorcycle could not be started .To remind the owner,the remote control will beep for 30 seconds with blinking of icons(exhaust pipe and headlight),then it will be vibrating for 8times.The system will arm again.
 
1.7 Siren pause
In alarming status,press the button lock to pause alarming.The system will arm again.And both of transmitter will stop alarming.
 
1.8 Arm reminding
Park the motorcycle and ACC OFF,if the system is not armed within 8 seconds,the system will beep 3 times with gleaming of flash lights to remind to arm the motorcycle.
 
1.9 Anti-hijacking
Press the button lock at least 2 seconds to enter into anti-hijacking mode during running. The headlight will flash sharply,the siren will chirp,the flash lights will gleam,then the motorcycle could not be started in 20 seconds.Press the button unlock to pause anti-hijacking.
 
1.10 Remote engine start
Park the motorcycle and press the start button 2times within 3 seconds,the engine will be started,the gas outlet icon will twinkle on the screen ,the transmitter will sound Bifor 3 times,the engine will turn off after 10 minutes.
After the engine started ,if press the start button once,the siren will sound Bionce, press unlock to cut off the engine.
 
1.11 Engine cut off by remote
In running of remote engine start mode, only press the button unlock once to cut off the engine.
 
1.12 Auto -rearm (Anti-false disarm)
In arm status,press the button unlock to disarm.if the engine is not started within 25 seconds,the system will be in arm status as it is regarded as false disarm,reminding with a Dusound from the remote control.It will not sound in silent arm status.
 
1.13 Motorcycle locating
Press the button searching once to find your motorcycle in the parking lot,then the siren will chirp for 10 seconds with gleaming of flash lights.
Keep pressing the button searching to find your motorcycle in the parking lot,then the flash lights will gleam without chirping.
Press any button to pause motorcycle locating.
 
1.14 Power off memory
In case the power supply is cut off,the system will restore to previous status.
 
1.15 Day&Night monitoring
In disarm status,if ACC ON,the remote control wil beep with vibration to remind the owner to arm the system.
 
1.16 Emergency disarm
In case the remote control is losing or it is damaged,just turn the key from OFF to ON for 10 times repeatedly,when the last time ACC ON for at least 2 seconds,the system disarm automatically. Press the button unlock to quit disarming. Or it will quit this mode after mode learning by another remote control.It can not be armed if it is not disarmed.
 
1.18 Signal indicator
In arm status ,if the remote control is unable to receive any signal from the brain unit,the signal indicator will disappear.That means it is out of service between them.
If only 1 or 2 signal indication bar on the remote control,means it is long distance between remote control and brain unit.
 
1.19 Special music reminding for no action
If no action when press any button on the remote,a special music from the remote will remind the remote control is trying to connect with brain unit.
 
1.20 Power status indication
If it is low power,press any button will remind to change new battery with Di..Di..sound .If the icon keeps blinking,means it is weak power in the battery.It should be changed a new one,otherwise it’s unable to operate.
 
1.21 Time Alarm setting
Press the button lock+unlock for 1 second to enter the setting status,transmitter will give out a sound,the lock will twinkle.
Press the button lock to shift and set among the following icon: time/min→time/h→alarm on/off→alarm/min→alarm/h→quit.The icon will twinkle when selected.
Press the button unlock to set each function,press the button lock to enter next function setting.When Quiticon twinkles,press the button lock+unlock for 1 second to save and quit.Press the button unlock only to quite without saving.
Setting:
TIME: set the Hour and Minute
ALARM: set the alarm ON/OFF,hour,minute;When alarm alarms,the alarm icon twinkles and the back ground color is green.
Quit: Press the button lock + unlock to save and quit ,the transmitter chirps once,and return to standby mode showing the time.
 
1.22 Transmitter Vibration Sensitivity Adjusting
In disarm status, Keep pressing the button unlock on the remote control,LED is on,flash lights will gleam once,the siren will Bionce,then adjust the sensitivity by pressing the button lock (with grade 1 to grade 5 ,default setting is grade 3),grade 1 siren Bi once,grade 2 Bi twice.Press the button unlock to save and quit.The transmitter will chirp once and return to standby mode showing the time .LED will be off,siren Bi once.
 
1.23 Code learning
Keep pressing the code learning switch ,the LED will light on. The LED will light on.Then press any button on the first remote control,the LED will flash twice,then siren will sound twice. The first remote control will response with music,code learning is successfully.Press any button on the next remote contron,the LED will flash four times,the siren will sound for 4 times.The remote control will response with music ,code learning for the next remote control is successfully.
 

Product Standard Compositions:
 
1 control unit,2pcs alarm lcd remotes,1pc alarm siren,1pc main cables,1pc microwave sensor,1pc english manual,1pc color box.

Product Real Photos: