long distance remote control car engine start stop system working with petrol or diesel car

this is only remote start stop engine module with remotes,it has not other functions!
if you need more car alarm functions,you can buy another model!

Model no is RS1400A

brand is cardot

Thank you for purchasing this universal Remote start Module!

1) Please read this manual carefully before installing this system, you'll take
the full advantage of every marvelous featues provided by thes system.
2) Seller is responsible for the service and warranrty.
3) The system requires specific maintenance.
4) This device may not cause harmful interference.
5) Due to the complexity of this system,it must be installed by professional staller.

Installation Instructions:

A. 6P start wires connections:

1. green start wire:

it is starter output(+).connect it to the vehicle's start wire which is positive power when you turn the mechanical key to start position.

2. Yellow ON1(ING1) wire:

Ignition output(+),connecting it to main ignition wire that provides +12V when the ignition is ON and while cranking the starter.

3. Red Wire:

Main Power Output(+) connecting it to the battery or constant power wire at the ignition switch.

4. Blue ON2(ING2) wire:

Ignition output(+),connecting it to main ignition wire that provides instant +12V signal and disappear when you turn the key to ON position.

5. White ACC wire:

Accessory output(+)mconnecting it to the accessory wire coming from the ignition switch that supplies power to the heater/air conditioner.some cars may have multiple accessory wires.

6. Black wire:

connecting it to ground or negative power

B. Blue/White wire footbrake wire connections:

connecting this wire to car footbrake switch!it is 12V positive power.

C. White/Black wire:Engine start detection wire:

it is positive power,connecting it to the high voltage coil from engine distributor,or you also connect it to fuel pump wire!

D. Brown wire:Turning Light Wire:

Truning light is also called Direction light,Manual turning light switch is near to steering wheel,so you can find turning light wire there,our system has two turning light wires,you can connect the one of them or both of them.
this turning light will flash when remote start is successful!

E. Grey wire:Handbrake Wire:

Must connect this wire to car handbrake swtich if your car is manual tranmission car,on the contray,if your car is auto transmission car,connect it to car metal body!if you don't connect this wire,no remote start function!

F. Green wire or blue wire:Side Door Wire

Product Composition:

              2pcs alarm remotes,1pc main cable,1 main unit,1pc manual,1pc box.

Product Real Photos: